Manfrotto
Kit Combination
MN701SPKIT only £189.00 (inclusive of VAT)
MN701SPKIT only £189.00 (inclusive of VAT)
Pre-Packaged Kit contains:
745B MDeVe Black Video Tripod with 50mm
levelling bowl
701RC2 Video Head
MBAG80 Carry Bag
0.8kg
4kg
200PL-14
10.1cm
Small
and lightweight, this fluid video head is capable of accommodating a payload
of up to 4kg, and is ideal for set-ups such as a fully equipped 3 CCD mini
CV camcorder or a spotting scope combined with a digital still or video camera
for digiscoping purposes.
The 701RC2 is one of the most compcat and lightweight two way heads found on the market and was designed principally to support the latest digital video equipment, including Mini DV and the latest prosumer/professional compact HI DEFINITION camcorders.
It is equipped with a fixed 1.5kg counterbalance spring which combined with a camera plate attachment made of touch and go/sliding plate who can shift from +15mm to -15mm from the 0 point to optimize the position of the counterbalance spring and deliver a wide range of balancing postions.
Fluid drag on the 701RC2 is fixed. The 701RC2 has a fixed length pan bar with a soft handle and separate locking mechanisms to the head to adjust it as you like, the sliding quick-release video plate system is based on the 200PL-14 supplied with the usual VHS pin.
The 701RC2 is one of the most compcat and lightweight two way heads found on the market and was designed principally to support the latest digital video equipment, including Mini DV and the latest prosumer/professional compact HI DEFINITION camcorders.
It is equipped with a fixed 1.5kg counterbalance spring which combined with a camera plate attachment made of touch and go/sliding plate who can shift from +15mm to -15mm from the 0 point to optimize the position of the counterbalance spring and deliver a wide range of balancing postions.
Fluid drag on the 701RC2 is fixed. The 701RC2 has a fixed length pan bar with a soft handle and separate locking mechanisms to the head to adjust it as you like, the sliding quick-release video plate system is based on the 200PL-14 supplied with the usual VHS pin.
FEATURES
1
Tilt Locking Knob
2 Pan Locking Knob
3 Spirit Level
4
Plate Release LeverTilt Locking Knob
5 Quick Realease Plate
5 Quick Realease Plate
6
Sliding Top
7 Graduated Scale for Sliding Top
8 Sliding Top Knob
7 Graduated Scale for Sliding Top
8 Sliding Top Knob
TECHNICAL
SPECIFICATION
+75o
-70o
1 Fixed
Yes
360o
1 Fixed
Yes
Yes
3/8" female thread to mount on 75mm ball or flat top tripod
Yes
1
Supplied with 1/4" camera screws
-20oC +60oC
1 Fixed
Yes
360o
1 Fixed
Yes
Yes
3/8" female thread to mount on 75mm ball or flat top tripod
Yes
1
Supplied with 1/4" camera screws
-20oC +60oC
Tilt
Tilt Drag
Independant Tilt Lock
Pan
Pan Drag
Independant Pan Lock
Counterbalance
Flat Base
Levelling Bubble
Pan Handle
Quick Release Plate
Temperature Range
To
correctly position a camera on a video head it is important to know its
balance point (also known as center of gravity or "CoG"). All
Manfrotto video head counterbalance systems take into consideration a camera
center of gravity of 125mm.
Telephone
+44 (0) 1494 880882
Email : info@gwdigitalandphoto.com
Email : info@gwdigitalandphoto.com
For enquiries, or to place an order please contact Graham: